75mm Sleeveless Drum Sander

75mm Sleeveless Drum Sander

75mm x 75mm sleeveless drum sander with a 1/2' bore (12.7mm) that will slide onto a bench grinder with a 1/2' shaft. These use a 75mm wide abrasive sanding strip. Held and tensioned in place with an elliptical locking key. They are locked onto the shaft by a grub screw. Also comes with sleeves to fit to a Pillar Drill.

Depth of internal measurement is 38mm.

(Allen key and sanding sheet key supplied).

Spare sanding sheets available.